Briefly talk about the relevant factors of medium frequency induction furnace life

Service life of medium frequency induction furnace. What does it have to do with? Now, let's continue to read along with Xiaobian

Value for money, value for money, has always been the hope of customers; Do you have your heat treatment equipment? If the customer can't bear the replacement of the machine in a short time, can your equipment have a "long life"?

As a new type of equipment, medium frequency induction furnace has been used in heat treatment of all walks of life, and has become a better choice for heat treatment in the eyes of customers. In other words, because customers spend a lot of money on equipment, it's natural that the equipment won't be replaced in a short time. It's really hard for customers to bear the equipment that will be scrapped in a short time.

First of all, the service life of medium frequency induction furnace is related to the manufacturer on the one hand and the user on the other. If the production quality of the equipment is good, and the components are high-end components, but as an operator, if you don't pay attention to the operation, everything is in vain; If so, even the gold plating equipment will not continue to use for a long time, so the protection of medium frequency induction furnace will be directly related to the future production!

Next, we talk about how to extend the service life of medium frequency induction furnace

1. Form a good habit and check whether the power supply of the equipment is abnormal every day; Whether the cooling channel, water pressure and temperature are abnormal; Whether the water pipe has leakage, seepage, etc; Whether the main circuit of medium frequency induction furnace, transformer, cooling water circuit and ventilation equipment is normal, etc.

2. Check the equipment regularly to see if the contactor, capacitor, sensor, IGBT, transformer of medium frequency induction furnace have any looseness, poor contact and ablation; Measure whether the current, voltage, power and insulation resistance of the equipment are normal.

3. Don't just think about the operation of the equipment. Through long-term operation, the medium frequency induction furnace should be completely protected. That is to check if the protection circuit of medium frequency induction furnace is over-voltage, over-current, lack of cooling, high temperature, etc. Check if the fuse of medium frequency induction furnace is loose; Check if the grounding resistance of medium frequency induction furnace meets the requirements; Check whether the contact of switch or circuit breaker is ablated; Check whether the time relay, temperature relay, over-current relay, pressure gauge, contact and wiring are normal; Check the inlet and outlet planning and cooling water flow.

4. When your company's medium frequency induction furnace is not in use for the time being, you must use a high-pressure air pump to blow off all the water in the equipment, so as to avoid the low temperature in winter, causing the water pipe to freeze or freeze. In addition, each inlet and outlet is sealed with tape. The whole equipment is wrapped in plastic bags to prevent dust or other substances from entering the equipment; Then put the medium frequency induction furnace in a dry, ventilated and dust-free place.

As long as the equipment is well protected, the service life of medium frequency induction furnace such as steel bar induction heating equipment and aluminum bar heating furnace will be longer, and more economic and social benefits will be brought to customers.